Standard #: MAFS.5.G.2.4 (Archived Standard)


This document was generated on CPALMS - www.cpalms.org



Classify and organize two-dimensional figures into Venn diagrams based on the attributes of the figures.


General Information

Subject Area: Mathematics
Grade: 5
Domain-Subdomain: Geometry
Cluster: Classify two-dimensional figures into categories based on their properties. (Additional Cluster) -

Clusters should not be sorted from Major to Supporting and then taught in that order. To do so would strip the coherence of the mathematical ideas and miss the opportunity to enhance the major work of the grade with the supporting clusters.

Date Adopted or Revised: 02/14
Content Complexity Rating: Level 2: Basic Application of Skills & Concepts - More Information
Date of Last Rating: 02/14
Status: State Board Approved - Archived
Assessed: Yes

Test Item Specifications

    Assessed with:MAFS.5.G.2.3



Related Courses

Course Number1111 Course Title222
5012070: Grade Five Mathematics (Specifically in versions: 2014 - 2015, 2015 - 2022, 2022 and beyond (current))
7712060: Access Mathematics Grade 5 (Specifically in versions: 2014 - 2015, 2015 - 2018, 2018 - 2022, 2022 and beyond (current))
5001060: Art - Intermediate 3 (Specifically in versions: 2014 - 2015, 2015 - 2019, 2019 - 2022, 2022 and beyond (current))
5012065: Grade 4 Accelerated Mathematics (Specifically in versions: 2019 - 2022, 2022 and beyond (current))
5012015: Foundational Skills in Mathematics 3-5 (Specifically in versions: 2019 - 2022, 2022 and beyond (current))


Related Resources

Formative Assessments

Name Description
Classifying Shapes

Students are asked to classify quadrilaterals and trapezoids by their properties.

Where Do They Belong

Students are asked to sort shapes using a Venn diagram and to determine the label for each section of the diagram.

Classifying Quadrilaterals

Students are given a diagram of quadrilaterals that have been sorted and are asked to determine how the shapes were sorted. Then, students are given two additional quadrilaterals and asked to place them into the appropriate region on the diagram.

Trapezoids

Students are asked to consider how the hierarchy of quadrilaterals would change based on the two different definitions of trapezoids.

Lesson Plans

Name Description
States of Matter and Their Properties - Lesson #1

Matter exists in three different states. Depending on factors such as temperature and pressure, matter can exist as a solid, liquid, or gas. Under specific conditions, matter has precise freezing, melting, and boiling points. This is the first lesson in a unit about matter.

Polygon Park

In this lesson students will use standards-based quadrilaterals and triangles to design a roller coaster tower. Students will use the Engineering Design Process to work through the processes in this lesson.

Go TRI a Kite!

In this lesson, students will identify and classify triangles. In addition, students will demonstrate how to solve problems requiring attention to approximation, selection of appropriate measuring tools, and precision of measurement using triangles.

Where in the Venn are the Quadrilaterals?

"Where in the Venn are the Quadrilaterals?" is an activity that helps the student to develop a better understanding of classifying two-dimensional figures in a hierarchy based on properties.

Triangles are Plane Easy

The student will be engaged in a paper plane making activity while discovering the attributes of different triangles. The students will learned the similarities and differences of the following triangles: scalene, isosceles, equilateral, right, obtuse, and acute.

Original Student Tutorials

Name Description
More Quadrilaterals - Part 7

By the end of this tutorial you should be able to identify examples of quadrilaterals and their defining attributes to classify them using diagrams. We will focus on kites and other quadrilaterals in this tutorial.

This part 7 in a 8-part series. Click below to explore the other tutorials in the series.

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals

Part 6: Trapezoids

Part 8: (Coming Soon)

Action ‘Figures’ Unite! - Part 8

Apply your understanding of the defining attributes of all 2-dimensional figures covered in this series to classify their relationships using Euler and Venn Diagrams.

This part 8 in a 8-part series. Click below to explore the other tutorials in the series. 

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals 

Part 6: Trapezoids

Part 7: More Quadrilaterals 

Trapezoids Part 6

Explore the defining attributes of trapezoids--a special type of quadrilateral--and classify them using diagrams in this interactive tutorial. You'll also learn how two different definitions for a trapezoid can change affect classifications of quadrilaterals. 

This part 6 in a 6-part series. Click below to explore the other tutorials in the series. 

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals

Quadrilaterals - Part 5

Learn how to classify quadrilaterals--including parallelograms, rectangles, rhombi, and squares--based on their defining attributes using diagrams in this interactive tutorial.

This is part 5 in a 6-part series. Click below to explore the other tutorials in the series.

Exploring Relationships with Venn & Euler Diagrams – Part 2

Learn how to show relationships represented in Venn & Euler Diagrams as you complete this interactive geometry tutorial.

This is part two of four. Click below to open the other tutorials in the series.

Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams – Part 4

Learn how triangles can be sorted and classified using side lengths and angle measures in this interactive tutorial.

This is the final tutorial in a four-part series. Click below to open the other tutorials in the series.

Classifying Triangles by Angles using Euler Diagrams – Part 3

Learn to classify triangles and use Euler diagrams to show relationships, in this interactive tutorial.

This is part-three of four. Click below to open the other tutorials in the series.

Teaching Ideas

Name Description
An Introduction To Quadrilaterals

This lesson is designed to introduce students to quadrilaterals and the terms and properties associated with quadrilaterals. This lesson provides links to discussions and activities related to quadrilaterals as well as suggested ways to integrate them into the lesson. Finally, the lesson provides links to follow-up lessons designed for use in succession with the current one.

Sets and The Venn Diagram (Beginner) This lesson is designed to introduce students to sets, what it means to be part of a set, and how Venn diagrams relate to sets. This lesson provides links to discussions and activities related to sets and Venn diagrams as well as suggested ways to integrate them into the lesson. Finally, the lesson provides links to follow-up lessons designed for use in succession with the current one.

Tutorial

Name Description
Quadrilateral Overview

This Khan Academy tutorial video introduces quadrilaterals. their categories, and subcategories.

Student Resources

Original Student Tutorials

Name Description
More Quadrilaterals - Part 7:

By the end of this tutorial you should be able to identify examples of quadrilaterals and their defining attributes to classify them using diagrams. We will focus on kites and other quadrilaterals in this tutorial.

This part 7 in a 8-part series. Click below to explore the other tutorials in the series.

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals

Part 6: Trapezoids

Part 8: (Coming Soon)

Action ‘Figures’ Unite! - Part 8:

Apply your understanding of the defining attributes of all 2-dimensional figures covered in this series to classify their relationships using Euler and Venn Diagrams.

This part 8 in a 8-part series. Click below to explore the other tutorials in the series. 

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals 

Part 6: Trapezoids

Part 7: More Quadrilaterals 

Trapezoids Part 6:

Explore the defining attributes of trapezoids--a special type of quadrilateral--and classify them using diagrams in this interactive tutorial. You'll also learn how two different definitions for a trapezoid can change affect classifications of quadrilaterals. 

This part 6 in a 6-part series. Click below to explore the other tutorials in the series. 

Part 1: "Figuring Out" 2D Figures

Part 2: Exploring Relationships with Venn & Euler Diagrams

Part 3: Classifying Triangles by Angles Using Euler Diagrams

Part 4: Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams

Part 5: Quadrilaterals

Quadrilaterals - Part 5:

Learn how to classify quadrilaterals--including parallelograms, rectangles, rhombi, and squares--based on their defining attributes using diagrams in this interactive tutorial.

This is part 5 in a 6-part series. Click below to explore the other tutorials in the series.

Exploring Relationships with Venn & Euler Diagrams – Part 2:

Learn how to show relationships represented in Venn & Euler Diagrams as you complete this interactive geometry tutorial.

This is part two of four. Click below to open the other tutorials in the series.

Classifying Triangles by Sides & Angles Using Venn and Euler Diagrams – Part 4:

Learn how triangles can be sorted and classified using side lengths and angle measures in this interactive tutorial.

This is the final tutorial in a four-part series. Click below to open the other tutorials in the series.

Classifying Triangles by Angles using Euler Diagrams – Part 3:

Learn to classify triangles and use Euler diagrams to show relationships, in this interactive tutorial.

This is part-three of four. Click below to open the other tutorials in the series.

Tutorial

Name Description
Quadrilateral Overview:

This Khan Academy tutorial video introduces quadrilaterals. their categories, and subcategories.



Printed On:5/2/2024 10:11:51 PM
Print Page | Close this window